1500LPH Manual Slag Discharge Diesel Lubricant Heavy Fuel Oil Handling System

1500LPH Manual Slag Discharge Diesel Lubricant Heavy Fuel Oil Handling System

Description:

1.Model PDSD1500-M-B1207 separator modular is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.        

2.The machine has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.   

3.The clear oil and dirty water are let out freely, the sludge is discharged manually. 

4.The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
5.The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”. 

Advantages:

1. Manual type slag removal unit

2. modular design

3. automatic control

Main Technical Specification:

Condition for mineral oil separation and actual capacity (refer to the chart)

Peony organizes the model selection question as below:

1)How many kinds of the oil can you separate?
This series separator is widely used for kinds of oils, especially for the Marine diesel oil and the similar oil, such as light fuel oil, heavy fuel oil, lubrication oil, steam turbine oil, detergence oil, engine oil etc

2)How can you select the suitable capacity?
Different oil has different capacity, our 1500L, 2000L, 3000L, 4000L, 5000L, 6000L, 8000L ,10000L capacity is for the Marine diesel oil 0# as sample. It also depends on the viscidity, temperature, and for all the capacity model, we have an oil characteristic sheet to help our customer to find out what their oil is, and what capacity their oil belongs to.

3) Is your separator self cleaning?
We have 3 types discharge means according to different material and customer's requirements, we have self cleaning model and manual cleaning model.
1. Manual discharge model for the oil with very less solid component
2. Full discharge model for the big capacity treatment and a little solid component
3. Partly discharge model for the bigger capacity treatment and more solid component

4.Variable discharge model

No.full discharge type and partially discharge type are both self cleaning model.

4)Will you help us to select the model?
Yes,you can select the model by yourself, or as long as you provide your material characteristic, we have professional engineer team to help you select the suitable machine

5)Do you only have the single machine or the unit?
Both we have.

Overview:

Guarantee: