1500 LPH Marine Disc Centrifugal Separator Vertical for Diesel Lubricant Fuel

1500 LPH Marine Disc Centrifugal Oil Separator Vertical for Diesel Lubricant Fuel

Description

Marine oil separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.

The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.It is divided into 2phase solid-liquid separator and oi-water-impurity 3phase separator.They are workable in land and ship,we have the CCS certificate to certify its function and usage.

There are different discharge types of the oils,manually,partial,fully discharged,variable discharge etc which depends on the different materials.commonly,we define the capacity as density of 0#  diesel oil ,and we have a chart to help you find out the exact processing capacity of your needs. We are not only provide the single oil separator,but also the whole unit containing the pumps,valves,heats,pipes and so on.

Competitive Advantages

•  Overload over heat protection
•  High rotating speed,
•  accurate dynamic balancing, 
•  long time with low vibration, 
•  safety and security.
•  CCS certificate
•  Continuous working

Main Technical Specification

The whole unit consists of

1. Separator     2. Screw pump    3. Electric control box           4. Steam heater

5. Temperature adjusting valve    6. Integral heat ball valve       7. Steam trap valve       

8. Temperature sensor         9. Pneumatic Three-way valve      10. Stop-check valve     

11. Oil filter       12. Vacuum gauge       13. Pressure gauge      14. Air pressure reducing valve  

15. 3/2 Solenoid valve          16. Ball valve          17. Brass filter ball valve

18. Water pressure reducing valve       19. 2/2 Solenoid valve      20. Pressure switch

21. moisture sensor      22. Skid

Principle and structure

Disc separator is vertical centrifuge. The drum is installed on the upper side of the vertical shaft. Driven by the motor, it will rotate at a high speed through the gearing. Inside the drum there is a group of dish parts overlaying each other – disc.

There is very small gap between the disc. Suspension (or emulsion) is fed into the drum through the inlet in the middle of the drum. When the suspension (or emulsion) flows through the gap between the disc, under the action of the centrifuge, the solid particles (or droplets) go down to the disc in the formation of sediment (or liquid layer).

Along the disc surface, the sediment slides out of the disc and accumulates at the part with the largest diameter inside the drum. After the separation, the liquid is discharge out of the drum from the drain outlet. The role of the disc is to reduce the sediment distance of solid particles (or droplets) and enlarge the sediment area of the drum.

With the disc inside the drum, the capacity of the separator is improved greatly. The solid gathering inside the drum is manually removed by taking apart the drum after power off, or discharges from the drum through the slag-off part with the separator power on.

Specification

Condition for mineral oil separation and actual capacity (refer to the chart)

Technical analysis

Peony's Disc separator technology comparison with famous foreign companies

Value Analysis

1. According to the requirements of each classification society, all modules are equipped with oil leak 

alarm and high temperature alarm.

2. Oil.hydraulic,pneumatic control part adopts the Brand Baode (Germany).

3. Heater adopts brand SWEP (Germany).

4. Pressure control adopts Korean products or  products

5.  Screw pump is used instead of gear pump.

6. All equipped with automatic temperature control device (Made by the RTK production in Germany or 

made in China)

7. The main electrical components of standard electrical control box are produced by Schneider company 

while PLC is produced by Siemens or Mitsubishi.

8. The complete sets referred above are all Peony's production of automatic Standard Controls and we 

certainly can modify the configuration list according to customers’ specified requirements.

Guarantee

Peony has advantages in price, service and quality.We have Military Product Quality System Certification, 

CE certificate,Quality System Certification,many professional equipments and advanced designs.

Application

Mineral oil industry: purification of fuel and lubricating oil used on main engine for vessels, land diesel engine, power plants, etc.

Overview

Guarantee
Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time.
We are committed to reward you with a better quality in return for our interest in and faith toward.
We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.