Máy tách dầu thực vật

High performance disc beer separator centrifuge with pressure keeping system Introduction Model PDSM-5000CN separator is mainly used in brewery for separation of yeast and clarification of beer. The liquid seal technology may functionally prevent from loss of carbon dioxide and avoid mixing of air during separating beer. The model is also used to separate similar material (e.g. Juice, beverage etc.) The machine adopts small piston structure for gaining variable discharging

Electrical Heating HFO Filtering Separator Centrifuge for Removing Water and Residue​ Product overview Model PDSD14000 separator disc fuel oil handling is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two

Industrial Centrifuge For Batch Type Centrifuge For Latex Concentration Centrifuge Product Description Centrifuge Separation The indissoluble liquids and solids with different densities will be separated while they are rotated at a high speed in the bowl, where the particles with heavier density move to the inside wall of bowl body, the lighter liquid toward the center of the bowl. Because the centrifugal force generated in the centrifuge fields in much larger than the

SS304 Latex Centrifuge Machine As Disc Type Centrifuge For Liquid Solid Separation Product Description To facilitate transportation and processing, natural rubber latex should be concentrated to the solid content of 60% by adopting the method of centrifugal or evaporation. so it also known as concentrated latex. Latex separator model PDSLA-400/600 is suitable for concentrating and purifying of the natural latex.It can separate the latex into the cream and skim,as well as

Description of GKH Automatic Horizontal PLC Programmable Control Centrifuge For Starch Product Description GKH automatic starch scraper discharging centrifuge is suitable for separating such products as small solid phase granularity and which is hard to be separated. It is widely used in pharmaceutical, chemical and food-stuff industry (e.g. corn starch, wheat starch, tapioca, potato starch). This machine is controlled by PLC and regulates speed by frequency convertor,

Latex Centrifuge Machine For Raw Material For Making Rubber Production Working Principle The liquids and solids, which are, will be, due to the different sediment velocities to be gained, separated and sediment in the centrifuge and gravity force fields thus to reach the purpose of separation. The liquid phase and solid phase, which interactive indissoluble and with different densities in the turbid liquid will be gained different sediment velocities, so as to be divided into

Latex Separator Machine High Speed Disc Centrifuge for Latex Rubber Product Description The natural latex is from rubber tree, milk white , solid content is 30%~40%, and the average diameter of solid is 1.06um. The fresh natural latex contain latex 27%~41.3%(m/m), water 44%~70%, protein 0.2%~4.5%, natural resin 2%~5%, saccharides 0.36%~4.2% and ash 0.4% . To facilitate transportation and processing, natural rubber latex should be concentrated to the solid content of 60% by

Description of PPCF Automatic Discharging Centrifuge PPCF Automatic Discharging Centrifuge is not only used for medium and fine particle contained suspension's separation, but also used for the solid-liquid separation of noxious, explosive and combustible products. It adopts indined hopper or screwd conveyor to discharge solid product. It is mainly used in solid-liquid separation of raw materials, intermediates and end products in the fields such as pharmaceutical industry

Description of PPCF Automatic Horizontal Scraper Separator Centrifuge Machine Starch Separator PPCF Automatic Centrifuge Machine Starch Separator is not only used for medium and fine particle contained suspension's separation, but also used for the solid-liquid separation of noxious, explosive and combustible products. It adopts indined hopper or screwd conveyor to discharge solid product. It is mainly used in solid-liquid separation of raw materials, intermediates and end