logo

Liquid Chlorella Disc Stack Centrifuges Concentration Equipment For Algae 2 Phase

Nơi xuất xứ:China
Tên thương hiệu:Peony
Chứng nhận:ISO
Số mô hình:PDSM20000-CN
Số lượng đặt hàng tối thiểu:1
Điều khoản thanh toán:TT, LC, L/C, D/A, D/P, T/T
Khả năng cung cấp:100sets per month
Chi tiết sản phẩm
Làm nổi bật:

disk stack centrifuge

,

disc bowl centrifuge

Machine Type: Máy ly trung tâm khử nước tảo
Type: Dùng nước tảo
Automatic Degree: hoàn toàn tự động
Bowl Material: SS
Separation: Tách chất lỏng rắn
Product Type: thiết bị tách
Phase: 2 pha
Sanitary Degree: GMP
Bearing: SKF
Operation: Dễ dàng và thuận tiện
Mô tả sản phẩm

Liquid Chlorella Disc Stack Centrifuges Concentration Equipment Algae Machine

 

 

Brief introduction

 

Model PDSM20000-CN separator is mainly used to remove water and algae such as Spirulina,green algae etc, which is very fine even can not be visible by eye. With high G-force during the running, the separator could get the concentration liquid with algae about 10%. 
 
The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.The sludge is discharged automatically and fully.
 
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
 
The design, product and acceptance are conformed to the standard of GB/T5745 “Disc Separator”.

 
Separation theorem: 
The mixture fluid to be processed are fed to the bowl from feeding pipe, under the effects of centrifugal force, he solids which has heavier density collects on the bowl wall .it include jams and impurities, collected in sediment holding space. After a while, the separated soilds are ejected from the bowl at controlling of control box. the intervals at which de-slugging have to take place depend on the quality of the mixture fluid. De-slugging include automatic de-slugging, total de-slugging, partial de-slugging. 

 

Normally customer don't need total de-slugging, put up partial de-slugging under the condition of effects of automatic de-slugging are bad, the interval between two partial de-slugging is up to two minutes, and electric current is normal. Then re-establish the automatic de-slugging interval. The lighter products (lower density) flow along the inner side of the discs into the passage in the upper distributor, the lighter product is discharged from the machine by the centrifugal pump. Thus the mixture fluid is separated well, the centrifuge adopts self de-slugging and centripetal pump. Thus the machine can work continuously for a long time, attain good separation effects in long run. 
 
Main technical parameters
 

Model

Capacity
(L/h)

Motor power
(Kw)

Discharging type

Output pressure of clear liquid
(Mpa)

Net weight
(Kgs)

Overall dimension
L × W × H (mm)

PDSM20000-CN 20000 22 Variable capacity discharging ≤0.2 1580 1479 × 1289 × 1583

 
 

Installation Notice
 

1. When install the separator, make sure there is enough space around the machine for its maintenance and repairing.
2. The operation water of the separator must be soft water, the pressure of which is between 0.025MPa and 0.03MPa.
3. All the pipes connecting with separator should be flexible.
4. The foundation must be firm,plan and leveling.
 
 
Reference Drawing

Liquid Chlorella Disc Stack Centrifuges Concentration Equipment For Algae 2 Phase 0

 Liquid Chlorella Disc Stack Centrifuges Concentration Equipment For Algae 2 Phase 1

 Liquid Chlorella Disc Stack Centrifuges Concentration Equipment For Algae 2 Phase 2

Guarantee

 

 Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers. 

Bạn cũng có thể thích
Chất lượng Máy ly tâm xử lý nước thải nhà máy
Băng hình

Máy ly tâm xử lý nước thải

Máy ly tâm xử lý nước thải Sự miêu tả Máy ly tâm decanter được sử dụng rộng rãi trong các dự án xử lý nước thải để khử nước bùn liên tục, loại bỏ chất rắn lơ lửng và tách chất lỏng rắn. Nó tách chất rắn khỏi chất lỏng bằng lực ly tâm tốc độ cao và xả bánh bùn đã khử nước liên tục qua băng tải trục v...
Chất lượng Máy ly tâm chiết xuất dầu cọ nhà máy
Băng hình

Máy ly tâm chiết xuất dầu cọ

Máy ly tâm chiết xuất dầu cọ Sự miêu tả Máy ly tâm gạn chiết dầu cọ được sử dụng để tách dầu-nước-rắn liên tục trong dây chuyền chế biến dầu cọ. Nó chủ yếu được áp dụng trong làm sạch dầu cọ thô, xử lý bùn dầu cọ, tiền xử lý nước thải của nhà máy dầu cọ và thu hồi dầu dư. Trong sản xuất dầu cọ, dòng ...
Chất lượng Máy ly tâm công nghiệp hóa chất tốt nhà máy
Băng hình

Máy ly tâm công nghiệp hóa chất tốt

Máy ly tâm công nghiệp hóa chất tốt Sự miêu tả Trong sản xuất hóa chất tinh khiết, nhiều dòng quy trình chứa các hạt mịn, chất lỏng ăn mòn, dung môi hữu cơ, muối, chất xúc tác, chất màu, polyme hoặc cặn phản ứng. Những vật liệu này thường yêu cầu tách chất rắn-lỏng ổn định trước khi sấy khô, xử lý n...
Chất lượng Phòng ly trung tâm máy xả canxi hypochlorite nhà máy
Băng hình

Phòng ly trung tâm máy xả canxi hypochlorite

Phòng ly trung tâm máy nghiền Calcium Hypochlorite Mô tả Sản xuất calcium hypochlorite liên quan đến các luồng quá trình ăn mòn và oxy hóa mạnh.Vật liệu thường chứa tinh thể hypochlorit canxi, nước mẹ, dư lượng muối canxi, hạt mịn và pha lỏng kiềm. Một máy ly tâm có thể được sử dụng để tách liên tục ...
Liên hệ với chúng tôi
Bạn có thể liên hệ với chúng tôi bất cứ lúc nào!