Model PDSD8000-B2543 Centrifugal Oil Water Separator for Marine Oil and Diesel Oil

Model PDSD8000-B2543 Centrifugal Oil Separator for Marine Oil and Diesel Oil

Description

Model PDSD8000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.

The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.    

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.  

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.

Main Technical Specification

The Whole Unit Consists of

1. Separator

2. Electric control box

3. Oil feed pump

4. Oil filter  

5. Pneumatic three-way valve  

6. Ball valve

7. Pressure gauge

8. Vacuum gauge  

9. Stop-check valve

10. 2/2 Solenoid valve

11. 3/2 Solenoid valve

12. Air reduction pressure valve  

13. Brass filter ball valve

14. Water pressure reducing valve

15. Temperature sensor

16. Liquid level switch

17. Sludge pump        

18. Skid  

Automatic control system

Water Control: Automatic control unlocking water, sealing water and water-seal/water switching.

Pneumatic Control: Filter and adjust compressed air, control three-way changeover pneumatic valve.

Temperature Control: Automatic control the temperature of the oil line, also control separately or with electric control cabinet at the same time.

Buzzer Control: Monitor oil temperature, pressure, over loading, non-discharging and leaking, and offer a group of passive contactor stretching out to control panel.

Processing equipment

Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.