Send Message
Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant

Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant

  • High Light

    centrifuge filtration systems


    bag lifting centrifuge

  • Description
    Mineral Oil Centrifuge
  • Application
    DO, FO, LO, Waste Oil Treatment
  • Structure
  • Discharging
  • Brand Name
  • Power Consumption
  • Model Name
  • Type
  • Operation
  • Shape
  • Place of Origin
  • Brand Name
  • Certification
  • Model Number
  • Minimum Order Quantity
  • Packaging Details
    Standard export packing
  • Delivery Time
  • Payment Terms
    TT, LC
  • Supply Ability
    100sets per month

Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant


Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant






Model PDSD4000P-B1217Z separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.


The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.        


The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.   


The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully. 


The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.


The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”. 


1. Controlled by touch panel and PLC programme, with both Chinese and English operation interface

2. Automatically control the sealing discharging process of separator, manual operation also allowed, parameters-setting by panel

3. equipped with high temperature, low pressure, motor overload, oil pump overload

4. automatically switching oil-way after alarm

5. Installed a dry contact to deliver alarm signal(One of the oil separator can function as diesel oil standby)

6. The cabinet equipped with hour totalizer


Main Technical Specification

Rated capacity L/h 4000 (0# diesel oil)
Effective capacity L/h 1500 (380CST/50°C)
Separation temperature   90-98°C
Output pressure of clear oil Mpa 0.2
Motor power Kw 7.5
IP grade   IP44
Insulation grade   F class
Dimension L × W × H (mm) 1450 × 1200 × 1600


Other oil capacity reference chart


Oil types

Fuel oil

Lubrication oil

Fuel oil

Heavy fuel oil

SAE30, 40

Detergence oil

Steam turbine oil

Kinematical viscosity(mm2/s)













< 900



< 900

Separating temperature


normal temperature, 40-60 best



Recommended capcity










Note: Reserve the right to change specifications without prior notification.



The Whole Unit Consists of


1.Separator   2. Screw pump   3.Electric control box  4. Steam heater  5. Temperature adjusting valve

 6. High temperature ball valve  7. Steam trap  8. Temperature sensor  9. Pneumatic Three-way valve    

10. Stop-check valve  11. Oil filter 12. Vacuum gauge 13. Pressure gauge 14. Air pressure reducing valve

15. 3/2 Solenoid valve  16. Ball valve  17. Brass filter ball valve   18. Water pressure reducing valve 

19. 2/2 Solenoid valve  20. 2/2 Solenoid valve  21. Pressure switch   22. Moisture sensor  23.Skid



Value Analysis


1. According to the requirements of each classification society, all modules are equipped with oil leak alarm and high temperature alarm.
2. Oil.hydraulic,pneumatic control part adopts the Brand Baode (Germany).

3. Heater adopts brand SWEP (Germany).

4. Pressure control adopts Korean products or products

5.  Screw pump is used instead of gear pump.

6. All equipped with automatic temperature control device (Made by the RTK production in Germany or made in China)
7. The main electrical components of standard electrical control box are produced by Schneider company while PLC is produced by Siemens or Mitsubishi.
8. The complete sets referred above are all Peony's production of automatic Standard Controls and we certainly can modify the configuration list according to customers’ specified requirements.



Peony organizes the model selection question as below


1)How many kinds of the oil can you separate?
This series separator is widely used for kinds of oils, especially for the Marine diesel oil and the similar oil, such as light fuel oil, heavy fuel oil, lubrication oil, steam turbine oil, detergence oil, engine oil etc

2)How can you select the suitable capacity?
Different oil has different capacity, our 1500L, 2000L, 3000L, 4000L, 5000L, 6000L, 8000L ,10000L capacity is for the Marine diesel oil 0# as sample. It also depends on the viscidity, temperature, and for all the capacity model, we have an oil characteristic sheet to help our customer to find out what their oil is, and what capacity their oil belongs to.

3) Is your separator self cleaning?
We have 3 types discharge means according to different material and customer's requirements, we have self cleaning model and manual cleaning model.
1. Manual discharge model for the oil with very less solid component
2. Full discharge model for the big capacity treatment and a little solid component
3. Partly discharge model for the bigger capacity treatment and more solid component

4).Variable discharge model

No.full discharge type and partially discharge type are both self cleaning model.
4)Will you help us to select the model?
Yes,you can select the model by yourself, or as long as you provide your material characteristic, we have professional engineer team to help you select the suitable machine

5)Do you only have the single machine or the unit?
Both we have.



More pictures


Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant 0Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant 1Separator - Centrifuge For 4000 LPH Partial Discharge lube Oil Recycling Plant 2




Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.