Product Details
Place of Origin: China
Brand Name: Peony
Certification: CCS
Model Number: PDSD3000F-B1215Z
Payment & Shipping Terms
Minimum Order Quantity: 1
Packaging Details: Standard export packing
Delivery Time: 45days
Payment Terms: TT,.LC, D/A, D/P, Western Union, MoneyGram
Supply Ability: 100sets per month
Advantages: |
Automatic Piston Type Slag Removal,Modular Design |
Oil Types: |
Fuel Oil,lubrication Oil |
Discharging Type: |
Full Discharging |
Motor Power(kW): |
4(380V/50Hz/3P) |
Heating Device: |
Optional |
MOC: |
SS304/SS316L |
Advantages: |
Automatic Piston Type Slag Removal,Modular Design |
Oil Types: |
Fuel Oil,lubrication Oil |
Discharging Type: |
Full Discharging |
Motor Power(kW): |
4(380V/50Hz/3P) |
Heating Device: |
Optional |
MOC: |
SS304/SS316L |
Automatic Vertical Mineral Fuel Oil Disc Stack Centrifuges Separator 4KW
Descriptions
Model PDSD3000F-B1215Z separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.
The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.
The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.
The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
Advantages:
Automatic Control System:
Water Control: Automatic control unlocking water, sealing water and water-seal/water switching.
Pneumatic Control: Filter and adjust compressed air, control three-way changeover pneumatic valve.
Temperature Control: Automatic control the temperature of the oil line, also control separately or with electric control cabinet at the same time.
Buzzer Control: Monitor oil temperature, pressure, over loading, non-discharging and leaking, and offer a group of passive contactor stretching out to control panel.
Condition for mineral oil separation and actual capacity (refer to the chart)
oil types |
fuel oil |
lubrication oil |
||||||||||
fuel oil |
heavy fuel oil |
SAE30,40 |
detergence oil |
steam turbine oil |
||||||||
kinematical viscosity (mm2/s) |
1.9-5.5 |
5.5-24 |
120 |
180 |
380 |
100-120 |
61.2-74.8 |
|||||
40℃ |
50℃ |
40℃ |
40℃ |
|||||||||
density/(kg/m3)(20℃) |
<900 |
900-991 |
880-900 |
<900 |
||||||||
separating temperature (℃) |
normal temperature 40-60best |
90-98 |
80-95 |
|||||||||
recommended capacity (l/h) |
3600 |
3000 |
1650-1800 |
1350-1500 |
1050-1200 |
1500-1800 |
750-900 |
2400-2550 |
||||
If you have special requirement, Please connect with us. |
Main Technical Specification
Discharging type |
full discharging |
|
motor power(kW) |
4(380V/50Hz/3P) |
|
N.W(kg) |
512 |
|
Dimension(L×W×H) |
1510*1100*1700
|
|
Rated capacity(L/h) |
Diesel recommended processing |
3000 |
SAE30/40 Lubricating oil is recommended
|
1500
|
|
180 CST fuel oil recommended processing
|
1500 |
The Whole Unit Consists of:
1. Separator 2. Screw pump 3.Electric control box 4. Steam heater 5. Temperature adjusting valve
6. High temperature ball valve 7. Steam trap 8. Temperature sensor 9. Pneumatic Three-way valve
10. Stop-check valve 11. Oil filter 12. Vacuum gauge 13. Pressure gauge
14. Air pressure reducing valve 15. 3/2 Solenoid valve 16. Ball valve 17. Brass filter ball valve
18. Water pressure reducing valve 19. 2/2 Solenoid valve 20. 2/2 Solenoid valve
21. Pressure switch 22.Skid
Technical analysis:
Peony's Disc separator technology comparison with foreign companies
No. |
Technical Content |
Peony’s Marine Disc Separator |
Oversea famous brand Disc Separator |
1 |
The performance index of material |
Viscidity(380 ~700 cSt/50℃) density(1010kg/m3) |
Viscidity(380 ~700 cSt/50℃) density(1010kg/m3) |
2 |
Capacity |
1500~8000L/h |
1500~8000L/h |
3 |
System integration |
Standardized, modular |
Standardized, modular |
4 |
The transmission system |
High-speed flat belt + friction coupling |
High-speed flat belt + friction coupling |
5 |
Drum structure |
"No gravity ring" + full hydraulic discharge mode |
"No gravity ring" + full hydraulic discharge mode |
6 |
Full automatic control level |
Fulfill online detection, real-time monitoring, intelligent feedback control Meet the requirements of ship with unmanned engine room |
Fulfill online detection, real-time monitoring, intelligent feedback control Meet the requirements of ship with unmanned engine room |
7 |
Moisture sensors |
capacitance(the same as Westfalia)
|
capacitance |
8 |
Design of calculation method |
Finite element analysis (Structure design and the internal flow field analysis of drum) |
Finite element analysis (Structure design and the internal flow field analysis of drum) |
9 |
Drum material |
DSS, Special stainless steel |
DSS, Special stainless steel |
10
|
Belt
|
Super seamless ring belt
|
Super seamless ring belt
|
Cost Analysis :
Compared selling price and maintenance cost with , Westfalia
and other domestic manufacturers
Value Analysis:
According to the requirements of each classification society, all modules are equipped with oil leak alarm and high temperature alarm.
Oil.hydraulic,pneumatic control part adopts the Brand Baode (Germany).
Heater adopts brand SWEP (Germany).
Pressure control adopts Korean products or products
Screw pump is used instead of gear pump.
All equipped with automatic temperature control device (Made by the RTK production in Germany or made in China)
The main electrical components of standard electrical control box are produced by Schneider
company while PLC is produced by Siemens or Mitsubishi.
The complete sets referred above are all Peony’s production of automatic Standard Controls and we certainly can modify the configuration list according to customers’ specified requirements.
Principle and structure
Disc separator is vertical centrifuge. The drum is installed on the upper side of the vertical shaft. Driven by the motor, it will rotate at a high speed through the gearing. Inside the drum there is a group of dish parts overlaying each other – disc. There is very small gap between the disc. Suspension (or emulsion) is fed into the drum through the inlet in the middle of the drum. When the suspension (or emulsion) flows through the gap between the disc, under the action of the centrifuge, the solid particles (or droplets) go down to the disc in the formation of sediment (or liquid layer). Along the disc surface, the sediment slides out of the disc and accumulates at the part with the largest diameter inside the drum. After the separation, the liquid is discharge out of the drum from the drain outlet. The role of the disc is to reduce the sediment distance of solid particles (or droplets) and enlarge the sediment area of the drum. With the disc inside the drum, the capacity of the separator is improved greatly. The solid gathering inside the drum is manually removed by taking apart the drum after power off, or discharges from the drum through the slag-off part with the separator power on.
Guarantee:
Peony has advantages in price, service and quality.We have Military Product Quality System Certification, CE certificate,Quality System Certification,many professional equipments and advanced designs.