CCS Certificate Belt Drive Disc Centrifugal Separator Modular Skid Type 4000lph

CCS Certificate Belt Drive Disc Centrifugal Separator Modular Skid Type 4000lph

Description

Model PDSD4000P-B1217Z separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.

The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully. 

The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time with low vibration, safety and security.

The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.

Advantages

1. Controlled by touch panel and PLC programme, with both Chinese and English operation interface

2. Automatically control the sealing discharging process of separator, manual operation also allowed,

 parameters-setting by panel

3. equipped with high temperature, low pressure, motor overload, oil pump overload

4. automatically switching oil-way after alarm

5. Installed a dry contact to deliver alarm signal(One of the oil separator can function as diesel oil standby )

6. The cabinet equipped with hour totalizer

Main Technical Specification

The Whole Unit Consists of

1. Separator   2. Screw pump   3.Electric control box  4. Steam heater  5. Temperature adjusting valve  6. High temperature ball valve  7. Steam trap  

8. Temperature sensor  9. Pneumatic Three-way valve  10. Stop-check valve  11. Oil filter  12. Vacuum gauge  13. Pressure gauge  14. Air pressure reducing valve

15. 3/2 Solenoid valve  16. Ball valve  17. Brass filter ball valve   18. Water pressure reducing valve  19. 2/2 Solenoid valve  20. 2/2 Solenoid valve  

21. Pressure switch   22. Moisture sensor  23.Skid

Model Condition for Mineral Oil Separation and Actual Capacity(refer to the chart)

Spot pictures

Processing equipments

Peony Centrifuge has been dedicated to producing machinery and equipments and carrying out facility construction, pursuing the best quality and producing the best product at the same time. We are committed to reward you with a better quality in return for our interest in and faith toward. We will do our utmost for one more stepping forward, based on our infinite services and trust to customers.