Industrial Continuous Centrifuge Separator For Drading System
Process Overview
The modern society uses more and more ultrafinematerials, such as ceramics, coatings, plastics,compounds, fibers, films, pigments and abrasionmaterials, between 0.1 and 5 micrometers. Such particles,the size of raw materials and other preparation ofmaterials can be made by fine grinding or made bychemical method is very expensive and not environmentalprotection, but the preparation method of the wet grindinggreatly increases the cost of production and operating
costs.
Range of Application
The grading system is suitable for preciseseparation of fine material of rough particles, the effect ofthe separation depends on the processing materials ofsolid content, viscosity, density and particle sizedistribution, and the performance of the equipment suchas centrifugal force, the design of the sizing chamber, andso on. The special rotor design of our company canprovide the grading effect of smooth and low turbulence,which is necessary for effective grading.
The grading system is in operation without theuse of dispersants.
| Drum Diameter | 500mm |
| The length of drum | 620mm |
| Turn the drum up speed | 2400 r/min |
| Turn the separation factor | 1610G |
| Processing | 500-1500l/h |
| Main motor | 15kw |
| Overall dimensions(lengthXwideXheight) | 1300X1300X2085 mm |
Product Features
The term 'classifying' defines the mechanical separation of a particle spectrum suspended in a liquid into two groups.
The separation is based on physical effects.
Due to its viscosity, the slurry adheres to the rotor wall and rotates at approximately the same speed. Subsequently, theliquid and the suspended solids particles are drawn by the centrifugal forces, working on them, to the classifying rotor wall anda parabolic liquid level is forming under the effect of acceleration due to gravity and centrifugal force.
At increased speed, with an annular classifying rotor lid, the slurry, in borderline case, is available in form of a liquidcylinder. Here flow forces in the lower Reynolds' number range are exerted on the solids particles suspended in the liquid,i.e. in laminar flow.
All in all, the particles are therefore subjected to directed total forces diagonal to the wall, the force deflection angle a isdecreasing as the volume increases, so that only the finest particles reach the top classifying rotor rim, while all others settleon the classifying rotor wall.
Certification
Guarantee
Peony Centrifuge has been dedicated to producing machinery and types of equipment and carrying out facility construction, pursuing the best quality and producing the best product at the same time.
We are committed to rewarding you with better quality in return for our interest in and faith.
We will do our utmost for one more stepping forward, based on our infinite services and trust in customers.
Our service
1. 12 months guarantee period from machine arriving date.
2. Abundant spare parts in stock are available to provide.
3. Our technicians could be dispatched for overseas service.
4. 7*24 hours technical consultation.
5. Your workers could get trained both in our factory and yours.
6. Routine tracing till the machine work properly will be done timely.
7. We will remind you to do the normal maintenance.
8. Your suggestions or any comments & reflection would be treated as a priority.
9. Marketing team will visit you during our visit to your country if you require.
Contact
Industrial Continuous Centrifuge Separator For Drading System
Tips:
Industrial basket centrifuge
oil centrifuge machine
vegetable oil refining separator
Our products are sold all over the world, you can rest assured.
