Dual Phase Steel 3-Phase Tricanter Work For Palm Oil Refinery Machine With Beach Angle 20 degree
Brief Introduction
Dual Phase Steel 3-Phase Tricanter Work For Palm Oil Refinery Machine With Beach Angle 20 degree.
Main Characteristics
1.Continuous working,spiral discharging,high capacity.
2.Controlled by two motors,rovolving drum can be adjustable two stage separately.
3.Wide applicability for chemical,oil,foodstuff,pharmacy industries and green industry in which solid-liquid separation is required.
4.Suitable for various products,capable for separating wide ranging solid phase grains(0.002-2mm),especially when separating solid phase has different size grains
For continuous separation of solids from liquids such as thickening and dewatering sludge, suspensions with granular solids, clarification of liquids, separating starch, etc. We provide a broad range of DECANTER sizes.
Application
Plam oil centrifuge is suitable for plam oil dehydration and slag, after separating plam oil reach national standard.
1.The integral design of the machine adopt international advanced type of structure design in recent years, motor puts beside, cover flat on flame structure, it causes that the machine maintenance is more convenient, low noise, small vibration, easy installation. 2.Stainless steel cover adopts enclosed design, peculiar smell gas of the machine in the work is not be leaked. It leads that the work environment satisfies the requirements. 3.Drum material adopts stainless steel 304/SS316L/DSS2205. 4.Vibration system adopts drum high modulus of elasticity of absorbing vibration damping device. Compared to previous models, the machine vibration is greatly reduced. 5.Electrical control adopts double frequency automatic control system 6.The other main components adopt joint venture or wholly-owned or domestic famous brand products.
And our model PDCS-21-W is similar with ALFA LAVAL PANX750CS,with actual feedback from our client.
Beach angle:20°
Our tricanter centrifuge is for continuous separation of solids from liquids such as thickening and dewatering sludge.
With disc separator,nozzler separator,our model is Disc separator PDSP15000-N,similar with PAS 710.
It is used for clarifying and purifying at same time also used to clarify and purify the similar materials. This is a new type of partial discharge and high speed centrifugal separator.
Our decanter centrifuge is applicable in chemical, pharmaceutical, food industries, etc.,for the solution of filtering and dewatering projects. After oil pressing, the palm oil containing water and solid will enter tricanter for separation. The oil phase can be treated using a purifier, and the oil content in the water phase can be recovery with a nozzle separator. Some of my customers in this field will put the oil after pressing in a tank, leave it for a period of time, it will form 3 layers, solid layer at the bottom, water layer in the middle, and oil layer on the top; then use a nozzle separator to treat the water phase to recover the oil.
Disc centrifuge separator specially used for separate water and impurities from palm oil,get clear palm oil,after tricanter centrifuge.
Decanters with slow rotation speeds are normally based on horizontal separation technology. Decanter eusure optimum separation efficiency in the case of suspensions with a very high proportion of solid. They are also used for the extraction constituents from liquids and for concentrating, dewatering and classfying solids. Decanter design: Type: 3- phase separation Materials: use high-quality stainless steel for all product wetted areas. Bearings: SKF brand. A special selection and arrangement of bearings provides for long life and exceptional reliability. Wear protection: welded hard facing or spray coating, ceramic technology.
Reference standard 1. Main standard of the national machinery industry. JB/T502-2004 "spiral discharge sedimentation centrifuge" JB/T9095-1995 "centrifuge, separator forgings, welding conventional NDT technology standard" 2. The national main standard GB10894-89 "separation machinery noise sound power level measurement engineering method" Plam oil tircanter - decanter centrifuge machines' structure: 1. Drum; 2. Screw pusher; 3. Planetary gear differential; 4. Base; 5. Stainless steel cover; 6. Absorber; 7. Motor;
We provide the tricanter centrifuge and disc separation for olive oil,the structure and design is same as the PIERALISI Company model P1500/2000 in Italy.We are the only manufacturer of olive oil extraction in China. With the market for olive oil becoming the huge business opportunity, so I hope we have a chance to cooperate and expand the olive oil industry to achieve the all-win development. As the following advantages,our equipment is applicable in various industries all over the world. 1.60 years of professional separator manufacturing. 2. Import advanced processing equipment from abroad to ensure processing accuracy. 3. Have the certificate certified by a professional organization. 4. Before shipment,we will provide the drawing and spare parts free of charge for the model.After shipment,we will provide 12-month warranty period for clients. 5. Be able to issue the certificate of origin to reduce the tax at the customer's location. And more...
With disc separator,nozzler separator
Our model is Disc separator PDSP15000-N,similar with PAS 710
| REFERENCE MODEL |
PAS 710 |
|
| Max Speed (Bowl) |
5469 |
RPM |
| Speed motorshaft |
1800 |
RPM |
| Frequency |
60 |
Hz |
| Recommended Power |
45 |
kW |
| Max Density of Feed |
1200 |
kg/m3 |
| Max Density of Sediment |
1700 |
kg/m3 |
| Process Temperature |
0/100 |
°C |
| Recovered Discharge Type |
Centripetal Pump |
|
| Effluent Discharge Tyoe |
Open |
|
| Number of Nozzles |
9 |
|
| Motor Power |
45 |
kW |
| Motor Current |
77.4 |
amp |
| Motor Frequency |
1776 |
RPM |
Certification
Contact
Dual Phase Steel 3-Phase Tricanter Work For Palm Oil Refinery Machine With Beach Angle 20 degree
